To Maintain swimming pool clean is the most essential part of pool. The circulation of water allows the pool chemicals to keep the water sanitized and crystal clear. This is greatly help by the type of sand pool filter that you use in your swimming pool your pool is just a pond without a good sand pool filter.
Swimming Pool Sand filters are the easiest to use of their operation is very basic, but excellent at doing the job of removing dirt and debris from your pool. Pool water is pumped into the filter and the sand traps the containments. The tighter the sand is packed in the filter the better. The water must work itself through the tightly compacted sand and is more likely to catch unwanted visitors. Sand filters are more efficient when they are slightly dirty; consequently they should only be backwashed when required by the increase in pressure. Sand filters should be cleaned at least every season with a filter cleaner. Dirt is removed from a sand filter by “backwashing” or reversing the water flow. Ask your pool professional about the proper “backwashing” procedure, as they change depending on the type of pool filter you have. The filter should be backwashed when the pressure gauge on the filter unit indicates a 7-10 lbs. increase over normal operating pressure. This is the pressure indicated on the pressure gauge when the filter is completely clean. A sand filter can filter the pool’s water down to about 25-30 microns of dirt. This is extremely beneficial at keeping your pool’s water clean and crystal clear. Contact us for the frequency requirements for changing the sand filter.